Replacing The Battery - Brother BCL-D60 User Manual

Chapter 4
Clean the charger contacts as follows:
a
Unplug the cradle from the AC power
outlet.
b
Clean the charger contacts (1) for both
the cordless handset and the cradle with
a cotton swab.
1

Replacing the battery

If your battery performance is getting worse,
make sure that you have charged the battery
correctly. If the battery performance is still
poor, it is time to replace it.
WARNING
Use a genuine Brother rechargeable
battery (BCL-BT10). If not, it may cause
damage or personal injury.
CAUTION
DO NOT take off the white plastic that
covers the battery.
a
Press the area indicated (1) on the
battery cover (2) and slide it off the
cordless handset.
1
25
b
Remove the old battery and pull out the
4
connector.
c
Insert the connector (1) of the new
battery (2) in the direction shown below.
d
Place the battery in the correct position.
4
e
Slide the battery cover back on.
Note
• Be careful that you do not catch the
battery connector cord.
• After battery replacement, you should set
the date and time. (See Date and
Time on page 20.)
2
f
Charge the battery for 12 hours. (See
Charging the battery on page 24.)
2
1