Setting Armrest Height - Invacare Aquatec Ocean E-VIP User Manual

Aquatec® Ocean E-VIP

4.8 Setting Armrest Height

Risk of Damage
– Adjust the height of the armrest equally on
both sides.
– The height of the right and left armrest is
adjusted in the same way.
1. Open the belt buckle of the backrest cover which is
passed on the inside of the backrest frame.
2. Open the belt buckle of the belt on the backrest cover,
which is above the armrest.
When adjusting to a lower position the belt
beneath the armrest must be opened.
3. Pass this belt on the inside of the backrest frame and
close it again.
4.
Remove cap A.
16
Borem ipsum
A
Fig. 4-8
5. Fold up armrest B to pull it off the armrest bracket C.
6.
Remove screws D from armrest bracket C with supplied
Allen key.
7. Remove securing clamp E with nuts F from the inside
of the backrest frame.
The nuts are inserted loosely into the securing
clamp and may drop out.
8. To reinstall armrest bracket and securing clamp at
desired position, insert screws D into armrest bracket
and guide them through the desired holes in the
backrest frame.
The smaller holes on the inside of the backrest
frame fix the securing clamp.
9. Place the securing clamp in such way that the fixing G
of securing clamp engages in smaller hole.
10. Tighten screws D with 8 Nm and nuts F.
Fig. 4-9
1556395-D