Advertisement
Available languages
Available languages
ANT. A
14
15
16
Fig. 2 Rear panel of CS-W4C
22
23
24
25
26
28
Fig. 3 CS-W4T
When the menu is called up
– Turn the knob to select a menu item or
change a setting
– Press the knob to call up a menu item
8 Button EXIT to exit the menu or a submenu
9 Button
to activate the key lock
(keep the button pressed for 1 second until
appears on the left of the display)
To deactivate the key lock, keep the button
pressed for 2 seconds until
10 RF indicators to indicate reception of a radio
signal, one each for the receiver sections
CH1– CH4
11 AF indicators, one each for the receiver sec-
tions CH1– CH4
The indicator will light up when the corre-
sponding microphone is used for speaking and
when the signal of this microphone is not sup-
pressed by the signal of another microphone
When the automatic mixing function has been
deactivated, the indicator will light up as soon
as a radio signal is being received
12 Button SET to select the receiver section
– whose settings are to be changed: When
the receiver section has been selected, call
up the setting menu by means of the button
SETUP (6)
VOLTAGE OUTPUT
MIXED
AF OUTPUT
4 3 2 1 GND
UNBALANCED
cascade A
LINK IN
LINK OUT
17
18
19
CS-W4T
27
SET
29
disappears
CH4
AF OUTPUT
AF OUTPUT
BALANCED
BALANCED
BALANCED
20
– whose settings are to be transferred to the
corresponding transmitter: When the re-
ceiver section has been selected, press the
button REMOSET (5)
13 Buttons
responding receiver section
14 Jack for connection to a mains socket (230 V/
50 Hz) via the mains cable provided
15 Power supply jack to connect another receiver
(chapter 4 1 1)
16 BNC jacks for the antennas provided
17 Antenna signal outputs to connect another
receiver (chapter 4 1 1)
18 Screw terminals VOLTAGE OUTPUT to control
external status indicators, for example (chapter
4 1 2)
19 Jacks LINK IN and LINK OUT to interconnect
multiple receivers CS-W4C (chapter 4 1 1)
20 Audio outputs (XLR jack and 6 3 mm jack) with
the mixed signal of the four receiver sections
and the mixed signal of a receiver connected
via the jack LINK IN (19) (line level or micro-
phone level can be selected)
21 XLR audio outputs (line level or microphone
level can be selected) of the receiver sections
CH1– CH4
1.2 Wireless microphone CS-W4T
22 On /off switch
OFF: microphone switched off
ON:
microphone switched on
LOCK: microphone switched on, setting menu
locked
23 Lockable mini XLR jack for the gooseneck
microphone
24 Power LED indicator
red:
normal operation
blue: REMOSET reception active
25 Display
26 LED indicator to indicate that the microphone
can be used for speaking
27 Buttons
28 Button SET to call up the setting menu
29 Talk button to activate / deactivate the micro-
phone for speaking
CH3
CH2
CH1
AF OUTPUT
AF OUTPUT
BALANCED
BALANCED
21
17
to adjust the volume of the cor-
for the setting menu
cascade B
ANT. B
16
21
Advertisement
