Table of Contents
Advertisement
Floppy Drive Swap
If you have two diskette drives installed and you enable this item, drive A be-
comes drive B and drive B becomes drive A.
Floppy Drive Seek
If you enable this item, your system will check all floppy disk drives at start up.
Disable this item unless you are using an old 360KB drive.
Password Check
If you have entered a password for the system, use this item to determine if
the password is required to enter the Setup Utility (Setup) or required both at
start-up and to enter the Setup Utility (Always).
Boot to OS/2 > 64MB
Enable this item if you are booting the OS/2 operating system and you have
more than 64MB of system memory installed.
L2 Cache
Leave these items enabled since all the processors that can be installed on
this board have internal L2 cache memory.
System BIOS Cacheable
If you enable this item, a segment of the system BIOS will be cached to main
memory for faster execution.
Graphic Win Size
This item defines the size of aperture if you use a graphic adapter.
DRAM CAS# Latency
This item determines the operation of the DRAM memory CAS (column ad-
dress strobe). We recommend that you leave this item at the default value.
The 2T setting requires faster memory that specifically supports this mode.
Timing Setting Mode
This item determines the timing setting mode of the memory. We recommend
you leave this item at the default value.
Auto Detect DIMM/PCI Clk
Use this item to enable the DIMMs or PCI slots to detect automatically device
then generating clock.
Spread Spectrum
If you enable spread spectrum, it can significantly reduce the EMI (Electro-
Magnetic Interference) generated by the system.
25
Advertisement
Table of Contents
