Other Table - Boss Audio Systems BV9700 User Manual

SETUP
• " Country Code" is used to set the
country code. The code information
standing for original producing area
country will be written in every DVD
disc when it is produced. There are two
characters standing for the name of the
country. For example, CN for China, CA
for Canada, and so on. Only when the
country code you set in the SETUP
menu matches with the disc's own
country code, the parent level that you
set will come into effect.
The detail operation is:
When you first set this item, it will
display "NEW" and require you to
input a new password, then input the
password again to confirm it.
Then the first character of the
country code will be selected, you
can use / buttons to select upward
or downward to confirm the first
character;
When you confirm the first character,
the second character will change into
all the characters that may match
with the first character to stand for
the corresponding country code;
Then use /
second character;
Press ENT or OK to confirm the
setting for country code.
Note:
If you have set a password in "Rating"
and "Password", when you set the
country code, it will require you to input
the password. Only when the password
is correct, can you be permitted to
change the country code.
If you select "Load Default" in SETUP
menu, the password you have set will be
cleared.
OTHERS SETUP
• When you enter into the OTHERS setup
page, you will see the following picture.
You can change the setting for Load
Default and Screen Saver.
OTHERS
Load Default
Screen Saver
buttons to select the
Select
On
Move Select
• "Load Default" is used to revert to factory
initial settings.
• "Screen Saver" is used to switch on/off
the screen saver function.
30