Other External Devices; Audio/Video Input; Playback; Audio Input - Boss Audio Systems BE9ACP User Manual

Apple carplay & android auto wired bluetooth 340 watts mp3-compatible digital media am/fm receiver featuring 9" 229 mm capacitive touchscreen and multicolor illumination options
Table of Contents

Advertisement

Other External Devices

Audio/Video Input

Playback

From the home menu, touch
Audio and video input screen is displayed.

Audio Input

You can listen to an audio device (e.g. a mobile
phone or MP3 player) through this unit.
Audio Cable Connection
Connect the RCA inputs ("L-IN" and "R-IN") on
the unit's back to the audio output on your
device. (P.30)
If your device does not have an RCA, use the
following audio cable (not included).
• For a device with 3.5mm headphone jack, use
a 3.5mm to RCA audio cable.
• For a device with USB-C port, use a USB-C to
RCA audio cable.
• For an iPhone, use a lightning to RCA audio
cable.

Video Input

You can play video from a playback device (e.g.
a CD/DVD, ect. ).
AV Cable Connection
Using audio/video cables (not included), connect
the RCA inputs ("L-IN", "R-IN" and "V-IN") on the
.
unit's back to the RCA outputs (yellow/white/
red) on your playback device. (P.30)
IMPORTANT NOTE
Use the controls on the external device for
playback control.
Video cannot be viewed while driving. The
vehicle must be stationary and the parking
brake applied to enable viewing.
WARNING
Never rely solely on the backup camera; always
check your surroundings before backing up.
Images may appear reversed if your camera is
not properly installed or set up.
Do not use features of this unit if it cannot be
operated safely and legally in your location.
Make sure front/rear camera connection is
correctly made. (P.31)

Manual Camera Trigger

From the home menu, touch
front and rear camera view options.
Note: To make available the camera view
options, enable the camera signal and power
input. From the home menu, touch
[Camera].
On the camera view screen, touch the camera
icon to switch between front and rear camera
view.

Automatic Camera Trigger

When the vehicle is put into reverse gear, the
rear camera view will turn on automatically.
The front camera view is not accessible when
reversing.
IMPORTANT NOTE
For automatic rear camera trigger, make sure the
purple/white wire (labeled "REVERSE INPUT")
from the supplied wire harness is connected to
the reverse light. (P.27)
Camera
to access
>
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Be9acp-cBe10acp-c

Table of Contents