Tv Operation; Av Operation; Rgb Operation - Boss Audio Systems BV9700 User Manual

OPERATION
And it will hold at each station for about
5 seconds.
- Automatic memory storing
Press and hold AS/PS button on remote
control for about several seconds or
press AS/PS button on the front panel,
the radio searches from the current
frequency and checks the signal
strength until one cycle search is
finished.
And then stations are stored into the
preset number button in turn according
to the strength of the stations. When
auto search is finished, it will enter into
preset scan mode automatically.
• Mono/stereo
Press MO/ST button on remote control
to select mono or stereo mode. You
can sometimes improve reception of
distant stations by selecting mono
operation.
• LOCAL/DISTANT
Press and LOC button on the remote
control to select between local and
distant stations.
Local setting for reception of strong
Station, and a distant setting for
reception of weaker stations. This
function is effect during AUTO SEEK
operation.

TV OPERATION

• Switching to TV mode
Press MODE button on remote control
to select TV mode.
• Auto searching TV channels
Press GOTO (AUTO) button on remote
control or press and hold AS/PS button
on the front panel for several seconds,
"SCAN READY" will appear on the
screen display, then press CH
remote control or press
the front panel to start search channel
automatically.
In the course of searching, press CH
button on the remote control or
on the front panel to stop searching.
• Selecting channel
Press CH button on remote control
or button on the front panel to
choose channel upward and press
CH button on remote control or
button on the front panel to choose
channel downward.
• Screen display
• Note: In TV mode press RPT+GOTO

AV OPERATION

• Switching to AV mode

RGB OPERATION

• Switching to RGB mode
on the
button on
button
27
The numeric buttons (0,1~9) allow
you to select the corresponding
channel directly.
Press digital select button -/--
cooperatively used with numeric
buttons to select channel desired.
For example, when you want select
16 channel, press -/-- button to switch
between "-" and "--", when the "--"
appears on the display, you can press
"1 "button then press "6" button to
select 16 channel.
Press TITLE (DSP) button on remote
control to display the current status
such as TVch. If you don't operate over
five seconds, the information on the
screen will disappear.
button on the remote control to change
the TV type among: NTSC, PAL B/C,
PAL I, PAL M, PAL D/K
There is a pair of AUDIO/VIDEO INPUT
jacks on the front and back of the unit.
When you connect an audio/video
system through these jacks, press
MODE button on the remote control or
on the front panel to select AV mode.
When you connect the RGB terminals
on the back of the DVD unit to the
corresponding RGB system, then Press
MODE button on the front panel or on
the remote control to select RGB mode,
the RGB signal will appear on the
screen.
Note: When you press MODE button
to select RGB mode and there is
no RGB signal input, then there
is nothing to be shown on the
screen.