Table of Contents
Advertisement
Quick Links
smardy - pure water
Reverse osmosis system YR100-A 75 GPD
Manual for disinfection of the system
As for all living beings, water is the most elementary basis for germs and bacteria too.
Particularly in stagnant water you will often find optimal living conditions in which they
multiply very well. In order to thoroughly remove harmful microorganisms, disinfect your
system during a filter change ideally BEFORE inserting the new filter at least every 12
months.
Please read this manual carefully before you disinfect the system and subsequently put it
back into operation.
Advertisement
Table of Contents
Related Manuals for SMARDY YR100-A 75 GPD
Summary of Contents for SMARDY YR100-A 75 GPD
- Page 1 - pure water Reverse osmosis system YR100-A 75 GPD Manual for disinfection of the system As for all living beings, water is the most elementary basis for germs and bacteria too. Particularly in stagnant water you will often find optimal living conditions in which they multiply very well.
- Page 2 required materials and accessories Filter sleeve 1 included in the scope of supply Filter sleeve 2 included in the scope of supply Knick’n’clean® aqua included in the scope of supply (Knick’n’clean® aqua is available under the following link) https://www.amazon.co.uk/dp/B075Z1MLTX...
- Page 3 Disinfection 1. Activate Knick’n’clean® aqua (IAW package leaflet) and let it rest for 30 minutes. 2. Emptying the system and the internal water tank Remove the water tank from the system and Empty the remaining water. ress and hold the MODE key and the water outlet key simultaneously for 3 seconds.
- Page 4 Safety instructions citric acid Knick’n’clean® aqua is the most effective disinfection system for small water filter plants and is ideal for household, camping and boat. It consists of a plastic bag (approved in accordance with the drinking water ordinance 2001) in which there are two liquids in separate compartments. 4.
- Page 5 6. Emtying the system and the internal water tank Remove the water tank from the machine and empty the remaining disinfecting solution. ress and hold the MODE key and the water outlet key simultaneously for 3 seconds. As soon as the total water (approx. 1 liter) has flown out of the device, please press the water outlet key once.
- Page 6 7. Filter change (Filter 1 / Filter 2 / Filter 3) 8. Reset filter indicator - Reset After the filter change it is necessary to reset the filter indicator with the aid of the reset buttons (see picture). Press and hold button ① ② for 5 seconds, to reset filter 1 and 2, press and hold button ③ for 5 seconds, to reset filter 3.
- Page 7 Replacement filters 6 months* 6 months* 12 months* * recommended change interval -Rückseite-...
Need help?
Do you have a question about the YR100-A 75 GPD and is the answer not in the manual?
Questions and answers