1. Manuals
  2. Brands
  3. SMARDY Manuals
  4. Water Filtration Systems
  5. YR100-A 75 GPD
  6. Manual

SMARDY YR100-A 75 GPD Manual

Reverse osmosis system - decalcifying the system
Hide thumbs

Advertisement

Table of Contents

smardy - pure water
Reverse osmosis system YR100-A 75 GPD
Manual for decalcifying the system
Depending on the degree of the hardness of the water in your region, over time lime
deposits will build up in the bottom and on the inner walls of the external water tank. The
harder the water, the sooner lime desposits will form.
It is important to decalcify the smardy - pure water reverse osmosis system- at least every
12 months. Please read this manual carefully, before you decalcify the system and
subsequently put it back into operation.
-Deckblatt-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the YR100-A 75 GPD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SMARDY YR100-A 75 GPD

Summary of Contents for SMARDY YR100-A 75 GPD

  • Page 1 The harder the water, the sooner lime desposits will form. It is important to decalcify the smardy - pure water reverse osmosis system- at least every 12 months. Please read this manual carefully, before you decalcify the system and subsequently put it back into operation.
  • Page 2 Filter sleeve 1 included in the scope of supply Filter sleeve 2 included in the scope of supply smardy BIO descaling agent 100g included in the scope of supply (smardy BIO descaling agent is available under the following link) https://www.amazon.co.uk/dp/B06ZZQWM37...
  • Page 3 DESCALING 1. Emptying the system and the internal water tank Remove the water tank from the system and Empty the remaining water. ress and hold the MODE key and the water outlet key simultaneously for 3 seconds. As soon as the total water (approx. 1 liter) has flown out of the device, please press the water outlet key once.
  • Page 4 Safety instructions citric acid ATTENTION! Causes severe eye irritation. Wash hands thoroughly after use. Wear eye protection. IN CASE OF CONTACT WITH THE EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. If medical advice is needed, have product container or label at hand. Keep out of the reach of children.
  • Page 5 5. Emtying the system and the internal water tank Remove the water tank from the machine and empty the remaining disinfecting solution. ress and hold the MODE key and the water outlet key simultaneously for 3 seconds. As soon as the total water (approx. 1 liter) has flown out of the device, please press the water outlet key once.
  • Page 6 6. Filter change (Filter 1 / Filter 2 / Filter 3) 8. Reset filter indicator - Reset After the filter change it is necessary to reset the filter indicator with the aid of the reset buttons (see picture). Press and hold button ① ② for 5 seconds, to reset filter 1 and 2, press and hold button ③ for 5 seconds, to reset filter 3.

  • Page 7: Safety Instructions

    Descaling process 1. Remove the water tank from the device. 2. In a measuring cup mix 50 grams of smardy special decalcifier with 1 liter warm water (approx. 50 degrees). Stir the liquid, until the powder is completely dissolved. 3. Fill the water container with the descaling mixture up to the mark MAX.
  • Page 8 Replacement filters 6 - 12 months* 6 - 12 months* 12 - 24 months* *recommended change interval -Rückseite-...

Table of Contents