1. Unpacking Remove all packaging material. Make sure that the reverse osmosis system does not show any external damage. 2. Scope of supply 1. smardy UF 2000 6. Angle valve connection adapter 3/8” 2. Water tap x 3/8” + stopcock 3.
3. Insertion of the membranes • Remove the hose from the membrane housing. • Unscrew the cover from the membrane housing. (Tool: Key for membrane housing) • Then first insert the membrane the housing up to the stop • Srew the cover back on to the membrane housing. •...
5. Installation Connect the line with the system Cold water pipe Stopcock Connection water supply Angle valve • The scope of supply includes a connector for the water supply as well as the corresponding stopcock. • Close the water supply on your angle valve and unscrew the cold water pipe. Then screw the connector for the water supply onto the angle valve.
Installation of the water armature: • Drill a 12 mm hole through the sink. 1. Put the cover over the threaded rod of the water tap. 2. Put the threaded rod through the drilled hole in the kitchen countertop. 3. Slide the locking washer from underneath over the threaded rod.
Granular carbon filter Every 6 months Daily output up to 2000 L N° 6 Sediment filter Every 6 months N° 9 Activated carbon afterfilter Every 12 months N° 10 Ultrafilter membrane Every 24 months Just smardy original filters ensure a trouble-free functioning!!
9. Assembly and instructions • We recommend, to let an installer perform the installation. Incorrect assembly can lead to water damage in the house! • The connecting parts are tested and standards compliant. Should you wish to obtain other connecting parts, you can acquire them from us, or from any installation specialist shop.
Need help?
Do you have a question about the UF 2000 and is the answer not in the manual?
Questions and answers