Table of Contents
Advertisement
www.seagullmodels.com
1) The blind nuts for securing the landing
gear are already mounted inside the fuselage.
2) Using the hardware provided, mount
the main landing gear to the fuselage.
3) Place the fuselage inverted on the work-
bench in a suitable stand. Set the landing gear
in place and use a screwdrive to secure the
landing gear to the fuselage using bolts
M3x12mm and washers. Make sure to use the
threadlock on the bolts so they don't vibrate
loose.
C/A glue
Cut.
3x12mm
Cut.
7
Advertisement
Table of Contents
