Authentication Settings- Username/Password - D-Link NUCLIAS CONNECT DAP-X2850 User Manual

Section 3 - Configuration
The Captive Portal is a built-in web authentication server. When a station connects to an AP, the web browser will be redirected to a web authentication
page. In this window, users can view and configure the Captive Portal settings. After selecting Username/Password as the Authentication Type, we
can configure the Username/Password authentication that will be applied to each wireless client in this network.
Enter the session timeout value here. This value
Session
can be from 1 to 1440 minutes. By default, this
timeout(1-1440):
value is 60 minutes.
Select 2.4GHz or 5GHz.
Band:
Select the SSID for this Authentication.
SSID Index:
Select the captive portal encryption type here.
Authentication Type:
Options to choose from are Web Redirection,
Username/Password, Passcode, Remote
RADIUS, LDAP and POP3. In this section we'll
discuss the Username/Password option.
Disable is default setting. Select Enable to
Web Redirection State:
enable the website redirection feature.
Select whether to use HTTP or HTTPS. After
URL Path:
selecting either http:// or https://, enter the URL
of the website that will be used in the space
provided.
Select to Enable or Disable the Captive Portal
IPIF Status:
with its IP interface feature here.
Enter the VLAN Group ID here.
VLAN Group:
D-Link DAP-X2850 User Manual

Authentication Settings- Username/Password

42