Ipv6 - D-Link NUCLIAS CONNECT DAP-X2850 User Manual

Section 3 - Configuration
Check to enable IPv6
Enable IPv6:
Dynamic IP is chosen here. Choose this option the
Get IP From:
DAP-X2850 can get IPv6 address automatically
or use Static to set IPv6 address manually.
When Auto is selected, the other fields here will be
grayed out.
Enter the LAN IPv6 address used here.
IPv6 Address:
Enter the LAN subnet prefix length value used here.
Prefix:
Enter the LAN default gateway IPv6 address used here.
Default Gateway:
D-Link DAP-X2850 User Manual

IPv6

22