Authentication Settings- Remote Radius - D-Link NUCLIAS CONNECT DAP-X2850 User Manual

Section 3 - Configuration
The Captive Portal is a built-in web authentication server. When a station connects to an AP, the web browser will be redirected to a web authentication
page. In this window, users can view and configure the Captive Portal settings. After selecting Remote RADIUS as the Authentication Type, you can
configure the Remote RADIUS authentication that will be applied to each wireless client in this network.
Enter the session timeout value here. This value
Session
can be from 1 to 1440 minutes. By default, this
timeout(1-1440):
value is 60 minutes.
Select 2.4GHz or 5GHz.
Band:
Select the SSID for this Authentication.
SSID Index:
Select the captive portal encryption type here.
Authentication Type:
Options to choose from are Web Redirection,
Username/Password, Passcode, Remote
RADIUS, LDAP and POP3. In this section we'll
discuss the Remote RADIUS option.
The default setting is Disable. Select Enable to
Web Redirection State:
enable the website redirection feature.
Select whether to use either HTTP or HTTPS
URL Path:
here. After selecting either http:// or https://,
enter the URL of the website that will be used
in the space provided.
Select to Enable or Disable the Captive Portal
IPIF Status:
with its IP interface feature here.
Enter the VLAN Group ID here.
VLAN Group:
D-Link DAP-X2850 User Manual

Authentication Settings- Remote RADIUS

47