Filters; Wireless Mac Acl - D-Link NUCLIAS CONNECT DAP-X2850 User Manual

Section 3 - Configuration
This page allows the user to configure Wireless MAC ACL settings for access control.
Displays the current wireless band rate.
Wireless Band:
Select Disable to disable the filters function.
Access Control List:
Select Accept to accept only those devices with MAC addresses in the
Access Control List. All other devices not on the list will be rejected.
Select Reject to reject the devices with MAC addresses on the Access
Control List. All other devices not on the list will be accepted.
Click the drop-down menu to select the SSID for the specified wireless
SSID Index:
band.
Enter each MAC address that you wish to include in your filter list, and
MAC Address:
click Apply.
When you enter a MAC address, it appears in this list. Highlight a MAC
MAC Address List:
address and click Delete to remove it from this list.
Current Client
This table displays information about all the current connected stations.
Information:
To upload an ACL list fle, click Browse and navigate to the ACL list file
Upload File:
saved on the computer, and then click Upload.
Load MAC File to Local
To download the ACL list, click Download and to save the ACL list.
Hard Driver:
Click to save the updated configuration. To make the updates
Save:
permanent, click Configuration > Save and Activate.
D-Link DAP-X2850 User Manual

Filters

Wireless MAC ACL

59