Installation; Remove The Unit; Trim Plate - Boss Audio Systems 738UA User Manual

1. INSTALLATION

The following illustration shows a typical installation. If you have any questions or require information
regarding installation kits, consult your customer car audio dealer or a company suppling kits.
If you are not sure how to install this unit correctly, have it installed by a qualified technician.
To attach the front panel back to the unit chassis,
please insert the right side of the panel in the chassis
until it is correctly engaged. Press the left side of the
panel until the mechanism locks it into place.
Control
Panel

Remove the unit

1. Press the Panel Release button.
2. Push the left side of the panel rightward
3. Pull the panel towards you to disengage it from the chassis.
Release
2
3
4
Tr i m
Plate
1
1
5 3
1
m m
Screw
Dashboard
Sleeve
Bend the appropriate
tabs to hold the sleeve
firmly in place.

Trim Plate