Ber(Bit Error Rate) Is High; Production Guidance; Reflow Soldering Temperature - Ebyte E70-915T14S User Manuel

Chengdu Ebyte Electronic Technology Co,;Ltd

11.3 BER(Bit Error Rate) is high

 There are co-channel signal interference nearby, please be away from interference sources or modify frequency a nd
channel to avoid interference;

Poor power supply may cause messy code. Make sure that the power supply is reliable.
 The extension line and feeder quality are poor or too long, so the bit error rate is high;

12.Production guidance

12.1 Reflow soldering temperature

Profile Feature
Solder Paste
Preheat Temperature min （Tsmin）
Preheat temperature max (Tsmax)
Preheat Time (Tsmin to Tsmax)(ts)
Average ramp-up rate(Tsmax to Tp)
Liquidous Temperature (TL)
Time（tL）M aintained Above（TL）
Peak temperature（Tp）
Average ramp-down rate（Tp to Tsmax）
Time 25℃ to peak temperature
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co,;Ltd
Sn-Pb Assembly
Sn63/Pb37
100℃
150℃
60-120 sec
3℃/second max
183℃
60-90 sec
220-235℃
6℃/second max
6 minutes max
E70-915T14S user manual
Pb-Free Assembly
Sn96.5/Ag3/Cu0.5
150℃
200℃
60-120 sec
3℃/second max
217℃
30-90 sec
230-250℃
6℃/second max
8 minutes max
24