Indication Of Wireless Transmitting; Configuration Procedure Of Module - Ebyte E70-915T14S User Manuel

Cc1310 915mhz smd wireless module

Hide thumbs Also See for E70-915T14S:

Table of Contents

Chengdu Ebyte Electronic Technology Co,;Ltd

5.6.2 Indication of wireless transmitting



Buffer (empty): the internal 1024 bytes data in the buffer are written to the RFIC (Auto sub -packaging).



When AUX=1, the user can input data less than 1024 bytes continuously without overflow. Buffer (not empty): when

AUX=0, the internal 1024 bytes data in the buffer have not been written to the RFIC completely. If the user starts to

transmit data at this circumstance, it may cause overtime when the module is waiting for the user data, or transmitting

wireless sub package.



When AUX = 1, it does not mean that all the UART data of the module have been transmitted already, perhaps the

last packet of data is still in transmission.



Only happened when power-on resetting or exiting sleep mode

E70-915T14S user manual

Table of Contents