Table of Contents
Advertisement
2.2 TECHNICAL FEATURES
• Steel tank with double layer vitrification.
• Anti-corrosion magnesium stick for assuring the durability of the tank.
• Condenser wrapped externally to the boiler, free from fouling and refrigerant with oil-water contamination.
• High thickness polyurethane foam (PU) thermal insulation.
• External structure made of sheet metal in two colours: the lower part in RAL 9003, the upper part in RAL 7035.
• Outer shell made of grey colour RAL 9006 plastic material.
• High and low gas pressure protections.
• Electrical heater available in the unit as a back-up (with integrated thermostat with protection temp. at 85°C+/-5°C),
assuring constant hot water even in extreme cold winters.
• ON-OFF contact for starting the unit from an external switch.
• Weekly disinfection cycle.
• Possibility of on/off contact management in order to turn on/off the unit when is required; it could be used for example
when you have the production of a photovoltaic system maximizing the self-consumption and energy efficiency.
2.3 ITEMS INSIDE THE PACKING-BOX
Before starting the installation, please make sure that all parts are found inside the box.
Item
Domestic hot water heat pump
User's-Installer's manual
Dielectric joints
8 bar pressure relief valve
Brackets for wall mount and screws
2.4 OVERVIEW OF THE UNIT
2.4.1 Hydraulic connections
Cold water
inlet
Hot water
outlet
INDICATION OF CONNECTIONS
Bottom view
FRONT VIEW
Power supply
cable
pass-through
hole
Condensate drainage
PACKING-BOX
- Cold water inlet
- Hot water outlet
- Condensate drainage
Image
Built-in
Included
Included
Connections
G ½" M
G ½" M
Ø 18mm
Quantity
1
1
2
1
2
15
Advertisement
Table of Contents
