Compliance; Fcc Compliance - JDS Uniphase SCG Series User Manual

Fiberoptic switch
Table of Contents

Advertisement

Symbol
WARNING
The procedure can result in serious injury or loss of life if not carried out
in proper compliance with all safety instructions. Ensure that all
conditions necessary for safe handling and operation are met before
proceeding.
The procedure can result in serious damage to or destruction of the unit if not
CAUTION
carried out in compliance with all instructions for proper use. Ensure that all
conditions necessary for safe handling and operation are met before
proceeding.

Compliance

FCC Compliance

The Federal Communications Commission (FCC) of the United States of America requires that
equipment operating in that country does not cause interference to communications. The unit
has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of Title 47 of the Code of Federal Regulations for Radio Frequency Devices. Operation is
subject to the following two conditions, which the FCC requires to be labeled on the unit:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause
undesired operation.
FCC rules require that the following note and subsequent information be included in this
manual:
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
These limits are designed to provide reasonable protection against harmful interference in a
commercial installation. The unit generates, uses, and radiates radio frequency energy and, if
not installed and used in accordance with instructions, can cause harmful interference to radio
communications.
Any user modification made to the unit voids the user's authority to operate the unit under the
FCC rules.
If this unit is used in a residential setting, resulting interference must be corrected by the user.
For
more
information,
http://www.access.gpo.gov/nara/cfr/cfr-table-search.html.
see
Title
47
of
Description
the
Code
of
Federal
Regulations
at
Safety – 4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scg-dScg-eScg-f

Table of Contents