Table of Contents
Advertisement
Operating Environment
In order for the unit to meet the warranted specifications, the operating environment must meet
the following conditions for temperature, humidity, and ventilation.
Temperature
The unit can be operated in the temperature range of 0 to 55 °C.
Humidity
The unit can be operated in environments with up to 95% humidity (0 to 55 °C). Do not expose it
to any environmental conditions or changes to environmental conditions that can cause
condensation to form inside the unit.
Ventilation
The unit contains a built-in cooling fan. Do not install it in any location where the ventilation is
blocked. For optimum performance, the unit must be operated from a location that provides at
least 75 mm (3 in) of clearance at the rear and at least 25 mm (1 in) of clearance at the bottom.
Blocking the air circulation around the unit can cause the unit to overheat, compromising its
reliability.
Warning
•
Do not use the unit outdoors.
•
To prevent potential fire or shock hazard, do not expose the unit to any
source of excessive moisture.
Storing and Shipping
To maintain optimum operating reliability, do not store the unit in locations where the
temperature falls below -40 °C or rises above 70 °C. Avoid any environmental condition that can
result in internal condensation. Ensure that these temperature and humidity requirements can
also be met whenever the unit is shipped.
Claims and Repackaging
Immediately inform JDS Uniphase and, if necessary, the carrier, if
•
The contents of the shipment are incomplete
•
The unit or any of its components are damaged or defective
•
The unit does not pass the initial inspection
In the event of carrier responsibility, JDS Uniphase will allow for the repair or replacement of the
unit while a claim against the carrier is being processed.
Returning Shipments to JDS Uniphase
JDS Uniphase only accepts returns for which an approved Return Material Authorization (RMA)
has been issued by JDS Uniphase sales personnel. This number must be obtained prior to
shipping any material to JDS Uniphase. The owner's name and address, the model number and
Getting Started – 12
Advertisement
Table of Contents
