Attaching The Module End Cover - Bose Acoustimass 6 Series II Owner's Manual

Attaching the module end cover

Figure 10
The module end cover fits over
the cables
AM252172_02_V.pdf
Setting Up Your Acoustimass
The module end cover is designed to hide the cabling and extend the smooth, clean lines of
®
the Acoustimass module. However, because the cover has a beveled surface, you cannot
stand the module on that end with the cover in place.
If you plan to use the cover, attach it to the cable end of the module after all connections
have been checked (Figure 10). Gently push the end cover into the grommets on the Acousti-
mass module.
Your set up is complete. Enjoy your Acoustimass 6 speaker system.
October 29, 2001
®
6 Speaker System
13