Using Your Dolby Digital (Ac-3) Receiver - Bose Acoustimass 6 Series II Owner's Manual

Using your Dolby Digital (AC-3) receiver

AM252172_02_V.pdf
Operating Your Acoustimass
®
Your Acoustimass 6 speakers are compatible with the output from Dolby Digital (AC-3)
receivers. Take special care to set the channel output according to the specifications listed in
the chart below. The Acoustimass speaker system is a full-range system and must be set as
LARGE speakers on the Dolby Digital screen menu. An exception is the center speaker, which
must be set as SMALL. Turn the subwoofer OFF and turn the LFE (low-frequency effects) ON.
Receiver channel output
Left and Right Front
Center
Left and Right Surround
Subwoofer
LFE (low-frequency effects)
Follow the receiver owner's guide instructions for using the receiver test tone to verify your
connections and to adjust the volume levels of the speakers.
October 29, 2001
Proper setting
LARGE
SMALL
LARGE
OFF
ON
®
6 Speaker System
15