IGM Professional FD3350 Operationg Instructions page 4

Operating manual
• Before changing router bit or making any kind of adjustment, always turn off and unplug your router.
• Use protective glasses during routing.
• Use hearing protectors.
• Always use a dust-protection mask or respirator.
• Use dust collection.
• Do not wear loose clothes. Make sure that your sleeves are either rolled up or fastened and that you are not
wearing a tie.
• Before starting your router remove all tools, nuts and other loose object from the work area.
• Avoid an inadvertent start of your router. Before you plug it in, verify the switch is in "off" position.
• Before you make any adjustments, wait till your router cutter completely stops.
FD3350 & 6350 SPARE PARTS LIST
Pos. # Description
10 Screw M4 x 16
Template brackets FD300 – not included , from FD300
13
14 Screw M4 x 8
22 Screw M5 x 8
23 Hex key 2,5
Template comb 6,35 mm ( ¼") Half Blind Dovetail FD300
26
33 Guide bush D 7,8 mm x 4
Edge guide D15,8 mm x 6 mm green FD3350
37
Edge guide D20,1 mm x 10,5 mm green FD6350
Edge guide D28,7 mm x 4 mm green FD3350
38
Edge guide D10 mm x 10 mm silver FD6350 not included,
from FD600
69 Screw M4 x 40
4
EN
SAFETY
-EN 3 -
quantity code
4 FS200126
2 FD6001-22
2 FD6001-21
4 FS200128
2 FS200143
1 F9900620
1 FD3350-04
1 FD6350-04
1 FGB078-02
2 FD3350-02
2 FD6350-03
2 FD3350-03
2 FD3001-03
2 FS200141
www.igmtools.com
v.5.1