Level Meter - CreamWare Noah Vocodizer Manual

Controls

Level Meter

The Vocodizer's level meters are located
in the upper left side of the main window.
Use these meters to monitor the input
levels of the source and synthesis signals,
and the level of the output. Well regulated
signals are important for optimal results.
Margin: Displays the highest signal level
reached so far. Use the Margin Reset
button to set the margin display back to
0.
Routing Text: Select the signal sources
to which the analysis and synthesis inputs
of the Vocodizer are connected by clicking
(left mouse button) on the appropriate field
and selecting one of Slot 1/2/3/4, Analog
or USB.
Vocodizer
Margin Reset
Routing Text
Voiced/Unvoiced Detection
Volume: Controls the Vocodizer's basic
volume level.
To be able to produce very narrow
filter settings while retaining
sufficient output level, the Vocodizer
amplifies signals internally by up to
24dB. In most cases you will not find
it necessary to adjust this control.
MIDI: Specify the MIDI channel on which
the vocoder and synthesizer should
respond to MIDI messages.
Contents Index
5