Presets
The Vocodizer stores different parameter
groups in separate preset lists. This lets
you manage, for example, the synthesizer
presets completely independent of the
vocoder presets.
The following preset lists are available:
Vocoder: Stores and recalls settings
specific to the Vocoder section.
A few settings are not stored, however.
For example, settings related to input
signal levels are not stored in presets,
as it would be self-defeating to do so.
Usually you will be experimenting with
different presets to process the same
input signal. If the input level changed
each time you loaded a new preset, the
process would be unnecessarily
clumsy.
Vocodizer
Settings not stored in presets include: all
Voiced/Unvoiced Detection, Analysis/
Synthesis Input gains, Input Insert
Effects, Solo, Voiced Source, and Master
Insert Effects.
These settings are stored in the Multi,
so that your setup will be restored
exactly the next time you load it.
FilterMix: These presets store the filter
settings. Along with the frequency, they
also store the volume and pan positions
of the individual filters. Depending on the
number of filter bands, and their proximity
to each other (in terms of frequency) the
bandwidth of each filter is also important,
and is also saved in the preset.
Matrix: The Matrix also has its own
preset list. The positions of each of the 22
routing switches are stored in the Matrix
presets.
3
Contents
Index
Need help?
Do you have a question about the Noah Vocodizer and is the answer not in the manual?