Decide Where You; Want The Speakers - Bose 151 Owner's Manual

Environmental speakers
Hide thumbs Also See for 151:
Table of Contents

Advertisement

D
ecide where you

want the speakers

For best results, mount both speakers on the
same wall, facing the listening area. Make
sure they do not face each other. (Outdoors,
if you are not using an existing wall, con-
sider the length of your listening area as
your "wall.")
Measure the length of the wall and divide
that length by six. Place one speaker one-
sixth the length from the left end of the wall.
Place the other speaker one-sixth the length
from the right end (see Figure 1).
1/6
length
of wall
Place one speaker one-sixth of the way from each end of the wall.
4
Length of wall
®
Figure 1
AM171297_09_V.pdf July 15, 2003
®
If you place your 151
you will probably connect them to an
amplifier or receiver that is inside.
Note: You may want to consult an electrical
installer who can route wires underground
or through walls if necessary.
Whether you mount them inside or out,
consider the following:
• Measure the length of speaker cords you
need to connect each speaker to your
receiver or amplifier. To determine the
wire gauge you will need, refer to the wire
gauge recommendations under "Techni-
cal information" on page 10.
• It is important that the speaker cord not
be tripped over, pinched, or pulled.
Determine the best route to protect the
wire.
speakers outdoors,
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents