Setting Up The Remote Control - Bose Wave radio Series III Owner's Manual

Bose wave radio series iii: owners guide
Hide thumbs Also See for Wave radio Series III:
Table of Contents

Advertisement

Setting Up

Setting up the remote control

Figure 4
Locating the safety lock
8
WARNING: Keep the remote control battery away from children. It may cause a fire or
chemical burn if mishandled. Do not recharge, disassemble, heat above 100˚C (212˚F), or
incinerate. Dispose of used battery promptly. Replace only with a battery of the correct type
and model number.
Your remote control may be one of two types (Figure 4A or 4B). Each is identified by the way
the battery compartment unlocks to install or replace the battery.
1. Place the remote control face down on a flat surface.
2. If your remote has a slot on the back (Figure 4A), follow step A. Otherwise, follow step B
and refer to Figure 4B:
A. Insert the tip of a ballpoint pen into the slot. Push to the side as shown and hold. Slide
the battery compartment open with your finger.
B. Using your finger, push the tab lock to the side as shown and hold. Slide the battery
compartment open.
A
B
Slot
Tab
+ Symbol
+ Symbol

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wave

Table of Contents