Page 1
Enabling standby (low power) mode Applies to: SoundTouch 30 wireless speaker SoundTouch 20 wireless speaker You can enable standby (low power) mode by removing the Ethernet cable, disabling Wi-Fi and clearing the Bluetooth® pairing list. Disabling Ethernet and Wi- Fi will prevent the system from connecting to your network, as well as preventing the system from being controlled by the SoundTouch®...
Page 2
Within 2.5 hours, the unit will enter standby mode To reactivate Wi-Fi, press and hold "3" and Volume down until the Wi-Fi indicator turns on. Reactivate Bluetooth by pairing with a Bluetooth source...