Technical Data - WEBTEC HPM110 Operating Instructions Manual

6

Technical data

Version
Input
Housing
Sealing
– Digital pressure gauge with ACT - MIN and
MAX Display
– bar graph display 33 segments
(with peak and hold function)
– 41/2 digit LC display (15 mm)
with back light illumination
– Battery powered with low power electronic
system
– Life time cycle 1,500 h
(No back light function)
Pressure port stainless steel 1.4404
– 1/4 " BSPP (ISO 1179-2) or 7/16-20 UNF
(ISO 11926-2/3)
– Strain Gauge Cell
0...100/600 bar
– Scan rate 10 ms
– Resolution 12 bit = 4,096 steps
– Accuracy ± 0.25 % FS typ.
± 0.5 % FS max.
Ø = 79 mm; T = 33 mm
Zinc Die Cast with Rubber Protection TPE
Standard NBR sealed
Viton® (FKM); EPDM on request
21