Playing The Multi-Disc Changer - Bose Acoustic Wave music system Owner's Manual

Using Your Acoustic Wave

Playing the multi-disc changer

10
® Multi-Disc Changer
Use buttons on the multi-disc changer remote or console, as shown below.
Function
To play the selected CD.............................
Results:
• If there is no CD in the slot, the word
"DISC" flashes on the multi-disc changer
display.
• If there is a disc, the display shows the
current track playing and elapsed play
time.
Press again to pause.
To pause the disc while it is playing.........
Press again to resume play.
To stop the CD............................................
Results: In the display window, the CD and
track number still appear, while the elapsed
time returns to zero.
To mute the CD...........................................
To skip tracks on a CD...............................
Results: The display shows the new track
number and elapsed time.
To scan through a track.............................
Press and hold to scan backward
ward . Continue holding to scan the next
or previous track(s).
To move to the next disc...........................
Results: CD number on the display
changes; LED next to the slot of the newly
selected CD flashes green, then stays lit.
To select a specific CD by number.............
Results: The CD in that numbered slot
begins to play.
Remote control
Changer
Changer
Track / Tune
ac / u e
or for-
(Press and Hold)
AUX 1 AUX 2 ON/OFF
Play/Pause Stop Next Disc CD Mode
Changer console
Play/Pause
Play/Pause
Stop
Not available
(Press and Hold)
Next Disc
Not available