After ironing
8
WARNING!
Unplug the iron first!
To descale the nozzle
Never descale the tank or treat with detergents or
solvents, as this would cause water to drip from
the iron when generating or spraying steam!
q Approx. every 4 weeks heat up the iron with a full
tank for 3 minutes at max. setting, then switch to
min. setting.
q Hold the iron over a bowl and press the motor
steam button until the motor automatically
switches off (recognisable by noise and vibration).
q Set to max. again and press the motor steam
button for 2-3 minutes to flush out the steam
chamber.
q Store the iron upright and not on the soleplate (risk
of corrosion).
q Do not wind tightly.