Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
When using your iron, basic safety precautions should always be followed, including
the following:
Read all instructions before using.
Use iron only for its intended use. Do NOT use to melt or seal materials. Iron could
be permanently damaged.
WARNING: To protect against a risk of electic shock, do not immerse the iron in
water or other liquids.
The iron should always be turned to Off" before plugging or unplugging from outlet.
Never yank cord to disconnect from outlet, instead, grasp plug and pull to discon
nect.
Do not allow cord to touch hot surfaces. Let iron cool completely before putting
away. Loop cord loosely around iron when storing.
Always disconnect iron from electrical outlet when filling with water or emptying and
when not in use.
Do not operate iron with a damaged cord or if the iron has been dropped or dam
aged.
To avoid the risk of electric shock, do not disassemble the iron. Call customer ser
vice for assistance if operation problems occur. Incorrect assembly can cause a risk
of electric shock when the iron is used.
This appliance should not be used by childern and care should be taken when used
near children. Do not leave iron unattended while connected or on an ironing board.
Ignited materials can cause a fire.
DANGER OF BURNS! Burns can occur from touching hot metal parts, hot water,
or steam. Use caution when you turn a steam iron upside down - there may be hot
water in the reservoir.
Always use a steam iron over an ironing board with a well fitted, padded cover.
Hot steam may condense into hot water and cause burns if not properly absorbed
by a covered and padded ironing board.
Never descale the tank or treat with detergents or solvents, as this would cause
water to drip from the iron when generating or spraying steam!
Connect and operate the appliance only in accordance with the specifications on
the rating plate.
3
Advertisement
Table of Contents
