Advertisement
for Integral Lightspan LED Batten Range
(Standard, Sensor & Emergency Options)
Code
Description
4FT BATTEN 4000K
ILBTC111
130LM/W LINKABLE
NON-DIMM
5FT BATTEN 4000K
ILBTC113
130LM/W LINKABLE
NON-DIMM
6FT BATTEN 4000K
ILBTC115
130LM/W LINKABLE
NON-DIMM
4FT BATTEN 4000K
ILBTC060
130LM/W LINKABLE
NON-DIMM
5FT BATTEN 4000K
ILBTC062
130LM/W LINKABLE
NON-DIMM
6FT BATTEN 4000K
ILBTC064
130LM/W LINKABLE
NON-DIMM
4FT BATTEN 4000K
ILBTC112
130LM/W LINKABLE
NON-DIMM
5FT BATTEN 4000K
ILBTC114
130LM/W LINKABLE
NON-DIMM
6FT BATTEN 4000K
ILBTC116
130LM/W LINKABLE
NON-DIMM
4FT BATTEN 4000K
ILBTC070
130LM/W LINKABLE
NON-DIMM
5FT BATTEN 4000K
ILBTC072
130LM/W LINKABLE
NON-DIMM
6FT BATTEN 4000K
ILBTC074
130LM/W LINKABLE
NON-DIMM
4FT BATTEN 4000K
ILBTC051
130LM/W LINKABLE
NON-DIMM
5FT BATTEN 4000K
ILBTC053
130LM/W LINKABLE
Installation Instruction Sheet
3 Year Warranty
Type
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Single
Twin
Twin
Power
Lumens
22W
2860
30W
3900
40W
5200
22W
2860
30W
3900
40W
5200
22W
2860
30W
3900
40W
5200
22W
2860
30W
3900
40W
5200
43W
5600
60W
7800
Nett
Dimensions
Weight
(Kg)
1170 x 60 x
1.7
71mm
1470 x 60 x
2.1
71mm
1734 x 60 x
2.4
71mm
1170 x 60 x
1.8
71mm
1470 x 60 x
2.2
71mm
1734 x 60 x
2.5
71mm
1170 x 60 x
1.9
71mm
1470 x 60 x
2.3
71mm
1734 x 60 x
2.6
71mm
1170 x 60 x
2
71mm
1470 x 60 x
2.4
71mm
1734 x 60 x
2.7
71mm
1170 x 60 x
1.7
71mm
1470 x 60 x
2.1
71mm
Advertisement
Table of Contents
Related Manuals for Integral LED ILBTC111
Summary of Contents for Integral LED ILBTC111
- Page 1 (Standard, Sensor & Emergency Options) 3 Year Warranty Nett Code Description Type Power Lumens Dimensions Weight (Kg) 4FT BATTEN 4000K 1170 x 60 x ILBTC111 130LM/W LINKABLE Single 2860 71mm NON-DIMM 5FT BATTEN 4000K 1470 x 60 x ILBTC113 130LM/W LINKABLE Single 3900 71mm...
- Page 2 DIMMING,REMOTE CONTROL Thank you for purchasing and Integral Led product. When installed correctly this unit will provide years of service with no lamp changes required. For support or warranty information please visit www.integral-led.com/warranty. Always turn off power at the distribution unit before any maintenance or installation.
- Page 3 the mounting surface, such as pipes or cables. It is not suitable for use on highly flammable surfaces or in flammable atmosphere. This luminaire is not suitable for dimming. No user serviceable parts. Ensure mains supply is isolated before starting any work. ...
- Page 4 The terminal supplied allows Loop-in / Loop-out wiring. If using this feature, maximum Wattage on a single circuit is 650W. Swing the lens and gently press both ends against the luminaire body, until it clicks. Emergency Operation The emergency battens can be operated in maintained or non-maintained mode. 1.
- Page 5 Sensor Operation Lightspan battens are fitted with an optional sensor, this turns the batten on when the light level reaches the specified level. Settings are made by setting dip switches on the sensor which is located inside the body of the fitting, please open the fittings as per the instructions above and set the dip switches in line with the table below, thank you.
- Page 6 Time Dip Switch 3 Dip Switch 4 Dip Switch 5 5 Seconds 30 Seconds 90 Seconds 3 Minutes 20 Mins 30 Mins Daylight Sensor Light Level Dip Switch 3 Dip Switch 4 Dip Switch 5 2 LUX 10 LUX 25 LUX 50 LUX DISABLE Warranty...
Need help?
Do you have a question about the ILBTC111 and is the answer not in the manual?
Questions and answers