Intended Use; Symbols - Conrad Mc Crypt LumiZIP1 Instruction Manual

2. Intended Use

The LED effect beamer LumiZIP1 is used to generate light effects in light show equipment, party rooms, etc. and is
controlled by the built-in controller or an external DMX controller.
This product is only approved for connection to 90 - 250V / 50/60 Hz alternating current and only for use with an
earthed mains socket.
The DMX connection must only be connected to suitable DMX controllers or other DMX effect lights with DMX
connections.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided
under all circumstances.
Any use other than that described above will damage this product and involves the risk of short circuit, fire, electric
shock, etc.
The entire product must not be modified or converted, and the casing must not be opened.
Observe all safety and assembly notes in these operating instructions!

3. Symbols

This symbol on the device indicates that the user must read these operating instructions before
using the product and observe them during operation.
The symbol with a lightning in a triangle is used where there is a health hazard, e.g. from electric
shock. The device contains no parts that require servicing by the user. Therefore, never open
the device.
The arrow symbol indicates special advice and operating information.
The exclamation mark indicates important notes in these operating instructions that must be
strictly observed.
20