Traffic Generator (Gige) - Intec ARGUS GigaBit Ethernet Manual

4 Traffic generator (GigE)

4 Traffic generator (GigE)
Use the ARGUS Traffic generator to check the capacity of Ethernet connections. When the
ARGUS Traffic generator is used together with a Loop, this will help you to estimate the
maximum possible throughput for this Ethernet connection.
The following parameters are required for the Traffic generator:

Protocol-independent parameters:
Test parameters
Traffic generator
Continuation on
next page
20

ARGUS - Status screen











Select a profile for editing. The
selected profile will be marked blue
in the display. The default profile
will be marked in the display with a
. The ARGUS will use the
parameters in the default (preset)
profile to setup the Ethernet
connection and the Traffic
generator.
The ARGUS will use the marked
profile as the default profile and
return to the Settings menu.


Select the test to be configured 
(in this example, Traffic generator).
ARGUS