Dri-Eaz F571-115V Owner's Manual

®
The Dri-Eaz Cube Dehumidifier reduces humidity in enclosed environments by removing water vapor
from the air. The Cube is ideal for water damage restoration, structural drying, construction, and many
other applications requiring temporary, high-performance dehumidification.
WARNING
Read and understand manual before operating.
SAFETY INSTRUCTIONS
WARNING! Do not alter or modify your unit in any
way. Use only replacement parts authorized by
Dri-Eaz Products, Inc. Modifications or use of unap-
proved parts could create a hazard and will void
your warranty. Contact your authorized distributor
for assistance.
WARNING! Electric shock hazard, rotating fan, hot
surface hazards. Unplug unit before opening cover
for cleaning or servicing. Unit must be grounded.
 Inspect the power cord before use. If cord is dam-
aged, do not use. Always grasp the plug (not the
cord) to unplug.
 Insert three-prong plug on power cord into a match-
ing electrically grounded outlet. Do not use adapter.
Never cut off third prong. Do not use an extension
cord.
 The unit must be operated on a 115V/60Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.
 Keep motor and wiring dry.
 Do not attempt to repair the unit. For Authorized
Service Centers, contact Dri-Eaz.
BEFORE YOU BEGIN
Warranty registration
Visit warranty.drieaz.com to register your purchase.
Registration allows us to better assist you with using,
07-02292A F571-115V
Owner's Manual
Cube Dehumidifier
Model F571-115V
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950 http://www.DriEaz.com
Patents: http://www.LBpatents.com
S A V E T H E S E I N S T R U C T I O N S
maintaining or servicing your equipment and to contact
you in case we have important safety information con-
cerning your Dri-Eaz product. If you determine service is
required, have your equipment model, serial number and
original proof of purchase available and call your distrib-
utor for assistance with obtaining a return material au-
thorization (RMA).
INTRODUCTION
The Cube Dehumidifier reduces humidity in enclosed
structural environments by removing water vapor from
the air. With proper use, the Cube can help to dry out
damp structural materials, insulation, and contents, and
Fig. A: Parts Identification
Carry handles
Remove/Insert
air filter here.
Air inlet
Cord and
hose storage
compartment.
1
Air outlet
(both sides)
Control
panel
Air outlet
(both sides)
Dri-Eaz Products, Inc.