Related Manuals for Alarm.Com Building 36 ADC-SWV100
Summary of Contents for Alarm.Com Building 36 ADC-SWV100
- Page 1 Building 36 Smart Water Valve Z-Wave User Manual V1.2 July 16, 2019 Building 36 Technologies Confidential and Proprietary...
- Page 2 Smart Water Valve Z-Wave User Manual July 16, 2019 1 Z-Wave Add and Remove Process 1.1 Adding the Water Valve to a Z-Wave network 1) Put Z-Wave controller into Add mode. See Z-Wave controller documentation for further information. 2) Press the NETWORKING button on the side of the control unit. The Z-Wave LED will begin to blink. 3) The valve has been successfully added to the network when the Z-Wave LED becomes solid.
- Page 3 Smart Water Valve Z-Wave User Manual July 16, 2019 SmartStart enabled products can be added into a Z-Wave network by scanning the Z-Wave QR Code present on the product with a controller providing SmartStart inclusion. No further action is required and the SmartStart product will be added automatically within 10 minutes of being switched on in the network vicinity.
- Page 4 Smart Water Valve Z-Wave User Manual July 16, 2019 6 Basic Command Class Handling The BASIC Command Class is mapped to BINARY SWITCH Command class as specified by SDS11847-8, section 4.25.5 Basic Command Considerations. 7 Configuration Command Class 7.1 Parameters 7.1.1 0x01: Z-Wave Listen Before Talk (LBT) Threshold –...
Need help?
Do you have a question about the Building 36 ADC-SWV100 and is the answer not in the manual?
Questions and answers