Advertisement
3
Notched Tab
IMPORTANT! If you pull the curtain string and the star lights
do not glow and you do not hear applause, you may need to
reshape the plastic tab on the back of the curtain. During
packaging and shipping, the notched tab on the curtain may
bend. If this happens, you may need to bend the notched tab
back into its original shape (flat).
• Tip the stage face down.
• Remove the screw near the notched tab from the archway
with a Phillips screwdriver.
4
Notched Tab Flat
• Straighten the notched tab by bending it back towards the
archway to straighten it. Make sure the notched tab is flat.
• Replace the screw into the archway. Tighten the screw
with a Phillips Screwdriver. Do not over-tighten.
• Check to be sure the notched tab rubs across the bump on
the archway. This triggers the lights and sound on the toy. If
you still do not hear sound or see lights, review this step or
check your battery installation (please review instructions on
page 7).
Fisher-Price, Inc., a subsidiary of Mattel, Inc.
East Aurora, New York 14052, U.S.A.
©1999 Mattel, Inc. All Rights Reserved.
® and ™ designate U.S. trademarks of Mattel, Inc.
Screw
Back View
Notched Tab Bent
Bump
Back View
• Do not immerse any part of this toy. Surface wash this toy
with a mild detergent and clean, soft cloth.
• If sound or lights from/on this toy become faint, or if there is
no sound or lights, remove the batteries and dispose of
them properly. Replace the batteries with three, new, size
"AA" (LR6) alkaline batteries.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician
for help.
Questions? We'd like to hear from you!
Call Fisher-Price
®
Consumer Affairs, toll-free at 1-800-432-KIDS,
8 AM - 5 PM EST Monday through Friday. Hearing-impaired
consumers using TTY/TDD equipment, please call
1-800-382-7470. Or, write to:
Fisher-Price
636 Girard Avenue
East Aurora, New York 14052
If you have any questions about this product:
In Canada, call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2.
In Great Britain, telephone 01628 500303.
In Australia, Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond,
Victoria 3121 Australia. Consumer Advisory Service 1-800-800-812 (valid only in Australia).
8
®
Consumer Affairs
Printed in Mexico
71899A-0920
Advertisement
