Advertisement
This package contains small parts.
Adult assembly is required.
1
• Position counter top A (there is a A on the underside) upside
down on a flat surface.
• Turn column A (there is a A on the underside) upside down
and fit it to counter top A.
• Insert four
1
/
" screws through the tabs on column A and into
2
the pegs on the counter top A. Tighten the screws with a
Phillips screwdriver. Do not over-tighten.
2
• Position counter top B upside down on a flat surface.
• Turn column B upside down and fit it to the counter top B.
• Insert four
1
/
" screws through the tabs on column B and into
2
the pegs on counter top B. Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
CAUTION
Column A
Counter Top A
Column B
Counter Top B
3
Notch
Clock Label
• Turn column A assembly upright.
• Wash your hands before applying the clock label.
• Make sure the area where the label will be applied is clean
and dry.
• For best results, do not attempt to apply the label more
than once.
• Align the notch in the clock label with the raised tab on
column A assembly.
• Apply the clock label as shown above.
4
Clock Face
Hour Hand
Minute Hand
• Insert the peg on the hour hand into the hole in the
clock face.
• Insert the peg on the minute hand through the hole in the
hour hand and into the hole in the clock face.
• From behind column A assembly, insert the
through column A and the hour hand, and into the minute
hand. Tighten the screw with a Phillips screwdriver.
Do not over-tighten.
3
Raised Tab
Column A
Assembly
3
/
" screw
4
Advertisement
