Summary of Contents for Fisher-Price SHAKE 'N GO! XTREME SPEEDWAY
Page 1
Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Requires four “D” (LR20) alkaline batteries (not included) for the charger. Tool required for battery installation: Phillips screwdriver (not included). www.fisher-price.com...
Page 3
Assembled Parts Battery Installation 1.5V x 4 "D" (LR20) Crossover Track Wavy Track • Locate the battery compartment door under the car charger. • Loosen the screws in the battery compartment door and remove the door. • Insert four “D” (LR20) alkaline batteries. Hint: We recommend using alkaline batteries for longer battery life.
Page 4
Easy Track Setup Upper Loop Support Upper Loop Support Lower Loop Support Lower Loop Track Socket • Turn a lower loop track over. • Fit a lower loop support into the socket on the lower loop track. Hint: The lower loop support only fits one way. If it does not seem to fit, turn it around and try again! •...
Page 5
Extreme Speed. Extreme Action. Extreme Fun! Indicator Lights Charge the Cars! Pit Stop Guide • Fit a car onto the charger. • The cars only fit on the charger one way. Make sure the car is placed on the charger properly to ensure a complete charge. Hint: The car only fits on the charger one way.
Page 6
Shake It, Then Race It! • Slide the power switch on the bottom of each vehicle ON • Put the ramps on the track to watch the cars “jump” the track! • Lift the car and shake it to start the "engine" and the sound effects. •...
Page 7
Easy Track Changeup! Try these fun track layouts!
Page 8
Easy Track Changeup! Try these fun track layouts!
Need help?
Do you have a question about the SHAKE 'N GO! XTREME SPEEDWAY and is the answer not in the manual?
Questions and answers