Before Operating; To Set The Clock; Stop/Clear; Open Or Close Drawer Microwave - Kucht KMD24S User Manual

BEFORE OPERATING

BEFORE OPERATING
Before operating your new Drawer Microwave make sure you
read and understand this Use and Care Guide completely.
The following steps MUST be taken before any functions can
be used.
Before you use the Drawer Microwave:
1. Plug in the Drawer Microwave.
CLEAR AND TOUCH CLOCK
2. Touch the Stop/Clear pad.
3. Set clock.

TO SET THE CLOCK

1. Touch Timer/Clock pad and number 2.
2. Enter the correct time of day by touching the numbers in
sequence. Touch Timer/Clock pad.
This is a 12 hour clock. If you attempt to enter an incorrect clock
time, will appear in the display. Touch the Stop/Clear pad
ERROR
and re-enter the time.
• If the electrical power supply to your Drawer Microwave
should be interrupted, the display will intermittently show
ENJOY YOUR MICROWAVE TOUCH CLEAR AND TOUCH CLOCK
power is reinstated. If this occurs during cooking, the program
will be erased. The time of day will also be erased. Simply
touch Stop/Clear pad and reset the clock for the correct time
of day.
8
ENJOY YOUR MICROWAVE TOUCH
will appear.
will appear.
:

STOP/CLEAR

Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during timed cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.

OPEN OR CLOSE DRAWER MICROWAVE

Always Touch the OPEN or CLOSE pad on the control panel to
open or close the Drawer Microwave.
Do not push or pull the drawer by hand, except in case of
pull slowly.
after the
E