Audible Signal Elimination; End Of Cooking Reminder; Auto Start; Demonstration Mode - Kucht KMD24S User Manual

SETTINGS

AUDIBLE SIGNAL ELIMINATION

At the end of timed cook, beeps will sound. The audible signal
can be turned off if you prefer quiet operation.
To Turn Sound Off
1. Touch Setup/Help pad.
2. Touch Setup/Help pad again.
3. Touch Start /+ 1 Minute pad. The display shows
To Restore Sound
1. Touch Setup/Help pad.
2. Touch Setup/Help pad again.
3. Touch Start /+ 1 Minute pad. The display shows

END OF COOKING REMINDER

At end of timed cooking, the microwave will signal every 10
Clear pad is touched, up to one hour.
1. Touch Setup/Help pad three times. The display shows
SIGNAL OFF? TOUCH START.
2. Touch Start /+ 1 Minute pad. The display shows
.
SIGNAL OFF
1. Touch Setup/Help pad three times. The display shows
SIGNAL ON? TOUCH START.
2. Touch Start /+ 1 Minute pad. The display shows
.
SIGNAL ON

AUTO START

If you wish to program the Drawer Microwave to begin cooking
automatically at a designated time of day, follow this procedure.
1. Touch Setup/Help pad 4 times. The display shows
TOUCH START.
2. Touch Start /+ 1 Minute pad.
3. Enter start time.
4. Touch Timer/Clock pad.
5. Touch the number keys to enter cooking time.
Touch Power Level pad repeatedly until the desired power
level is reached.
6. Touch Start /+ 1 Minute pad.
E
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM

DEMONSTRATION MODE

1.
ON? HOLD START 3 SEC.
2. Hold Start /+ 1 Minute pad for 3 seconds. The display shows
DEMO ON.
SOUND OFF.
1.
OFF? TOUCH START.
2. Touch Start /+ 1 Minute pad. The display shows
NOTE:
SOUND ON.
• Drawer Microwave doesn't heat in Demo Mode.
• Display counts down quickly.
TIMER
1. Touch Timer/Clock pad and number 1.
2. Enter time.
3. Touch Timer/Clock pad again.
R E M N I D
To cancel timer, touch Stop/Clear.
R E M N I D

STANDBY MODE

This microwave will go into standby mode after a period of
inactivity. The backlight of the display will automatically dim
after 3 minutes if the unit has not been in operation. If the display
R E M N I D
is in standby mode, simply touch the control panel or open/close
the door to return the backlight to maximum brightness.
R E M N I D
AUTO START
DEMO
DEMO
DEMO OFF.
17