How To Use; Power Supply; Removal And Attachment Of Roller Holder - Silvercrest SHE 3 A1 Operating Instructions Manual

__KRA106439_B1.book Seite 61 Donnerstag, 14. August 2014 4:29 16
6.

How to use

• Remove all packing material.
• Check that the delivery is complete.

6.1 Power supply

WARNING! Risk of material damage! Be sure to observe
the correct polarity when inserting the batteries.
1. Slide the battery compartment lid 7 off the housing 5.
2. If necessary, replace the old batteries with new ones.
3. Slide the battery compartment lid 7 back on to the hous-
ing|5.
6.2 Removal and attachment of roller
holder
Removal
• Press the button 6 and remove the roller holder 2 upwards.
Attachment
1. Figure A: place the roller holder 2 on the top of the device
in such a way, that the cog wheels of the roller and the
device are above one another.
2. Press the roller holder 2 on to the device until it engages
audibly.
3. Check that it is secure.
61
GB