Table of Contents
Advertisement
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to an
B
MD deck or DAT deck
This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use
amplifier (receiver) has a digital input jack, use
deck, use
B-2
deck without using your stereo amplifier (receiver).
xRecommended surround sound effects for the
• TVS STANDARD (page 59)
z
In connection
z
To realize better surround sound effects, make sure that your listening position is in between your speakers.
Notes
• If you select one of the TVS effects while playing a disc, no sound will come from your speakers with the
connection.
• MP3 audio and ATRAC3 audio tracks will not be output from the DIGITAL OUT (OPTICAL) jack.
26
. In this case, you can also connect the player directly to the MD deck or DAT
, you can use the supplied audio/video cord instead of using a separate audio cord.
B-1
B-2
. When connecting to an MD deck or a DAT
connection only.
B-1
. If the
B-1
B-2
Advertisement
Table of Contents
