Makita DLM382 Instruction Manual page 12

Cordless lawn mower
Hide thumbs Also See for DLM382:
Table of Contents

Advertisement

Available languages

Available languages

Storage
WARNING:
When carrying or storing the
mower, do not hold the folded handles but the
front grip of the mower. Holding the folded handles
may cause a serious injury or damage to the mower.
Before storing the mower, remove the battery cartridge and lock key.
Store mower indoors in a cool, dry and locked place.
Don't store the mower and charger in locations where
the temperature may reach or exceed 40 °C (104 °F).
1
► 1. Front grip 2. Rear grip
1.
Loosen the clamping screws and expand the lower
handle to both sides. Move down the handle forward. At this
time, keep a firm grip on the lower handle so that the han-
dle does not fall down to the far side from the mower body.
► 1. Clamping screw 2. Lower handle
2.
Loosen the clamping nuts and pivot the upper
handle back while expanding the both sides.
1
► 1. Clamping nut 2. Upper handle
3.
the mower body.
2
► 1. Grass basket
NOTE: When putting the mower in the upright posi-
tion, do not hold the handle but use the front grip of
the mower.
Removing or installing the mower
blade
battery cartridge when removing or installing the
blade. Failure to remove the lock key and battery
cartridge may cause a serious injury.
onds after releasing the switch. Do not start any
operation until the blade comes to a complete
stop.
dling the blade.
Removing the mower blade
For DLM382
2
1.
1
height adjusting lever comes to the upper side.
2.
similar tool into a hole on the mower body.
3.
2
► 1. Mower blade 2. Screwdriver 3. Wrench
12 ENGLISH
Store the grass basket between the handle and
WARNING:
Always remove the lock key and
WARNING:
The blade coasts for a few sec-
WARNING:
Always wear gloves when han-
Put the mower on its side so that the mowing
To lock the blade rotation, insert a screwdriver or a
Turn the bolt counterclockwise with the wrench.
1
2
1
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dlm432

Table of Contents