Table of Contents
Advertisement
TROUBLESHOOTING
●
PROBLEM
The projector doesn't switch on
The lamp is on but the projector doesn't respond
to the controller
The projector functions intermittently
Beam appears dim, Low in brightness
The project image appears to have a halo
Heavily Defective Beam
3.
APPEARANCE
4.INSTALLATION
RIGGING
●
Before moving a projector, Please lock Pan and Tilt. Before its operation, please unlock them. It's forbidden to run a projector
with power while it is locked
Check the fuse on the power socket.
Check the lamp.
Make sure that the fixture's start address is right
Replace or repair the XLR signal cable.
Make sure the fan is working well or fans and their shields are not blocked
Make sure the lamp is within its lifespan
Remove dust or grease from the lenses.
Carefully clean the lamp, optical lenses and other components.
Check if lens are in good condition(not cracked)
Clean dust or grease on the lens.
5
ACTION
Body
Arm
Base
Advertisement
Table of Contents
