General Commands; Current Time Setting; Start Time Program Setting - Rain AMICO PRO Instructions Manual

A
B
C
D
E
NOTE: RUN MANUAL CYCLE ONCE BEFORE START OF OPERATION
TO ENSURE THE VALVES ARE CLOSED

CURRENT TIME SETTING

Press the Ok button to activate backlit display.
Current time display will start blinking.
In order to modify the hours press + or – button. When the
desired hour is reached, press Enter to begin setting the
minutes. Repeat as above using the + and - buttons to mo-
dify. Upon completion press Enter in order to move to the
Start Time setting.

START TIME PROGRAM SETTING

Start Time is the time to begin the irrigation cycle.
Press OK button and using the + and - buttons set the desi-
red starting hour. Then, press Enter and repeat this step to
modify the minutes. Press Enter in order to save and move
to the Duration setting.
NOTE: set "OFF" if you don't want to use the program.

General commands

SCREEN:
A: Current time
B: Start Time
1 C: Duration
D: Frequency
E: Next irrigation
2
KEYS:
1. OK To confi rm a new setting
3
2. AUTO OFF Set Program is running/ Turn the
station/functions off
3. MANUAL To water manually
4. "-" To decrease a numeric setting
5. "+" To increase a numeric setting
4 5
SETTINGS
RAIN s.p.a.
via Kennedy 38/40
20023 Cerro Maggiore
ITALY (MI)