Loading Documents; Using The Adf (Mfc-290C And Mfc-297C Only); Using The Scanner Glass - Brother MFC-297C User Manual

Loading documents

You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.
Using the ADF
(MFC-290C and MFC-297C
only)
The ADF can hold up to 15 pages and feeds
each sheet individually. Use standard
2
80 g/m paper and always fan the pages
before putting them in the ADF.
Recommended environment
Temperature: 20 to 30° C
Humidity: 50% to 70%
Paper:
80 g/m
Document Sizes Supported
Length: 148 to 355.6 mm
Width: 148 to 215.9 mm
Weight:
64 to 90 g/m
How to load documents
CAUTION
DO NOT pull on the document while it is
feeding.
DO NOT use paper that is curled, wrinkled,
folded, ripped, stapled, paper clipped,
pasted or taped.
DO NOT use cardboard, newspaper or
fabric.
2
2
2
2
2
2
2
Loading paper and documents
Make sure documents with ink or liquid
correction fluid are completely dry.
a
Unfold the ADF Document Output
Support Flap (1).
b
Fan the pages well.
c
Make sure you place the documents
face down, top edge first in the ADF
until you feel them touch the feed roller.
d
Adjust the paper guides (2) to fit the
width of your documents.
2
CAUTION
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.

Using the scanner glass

You can use the scanner glass to fax, copy or
scan pages of a book or one page at a time.
Document Sizes Supported
Length: Up to 297 mm
Width: Up to 215.9 mm
Weight: Up to 2 kg
2
1
2
2
17