Product Feature Identification - Tannoy CMS 801 Series Quick Start Manual

16
CMS 801 Series

Product Feature Identification

Fig 1.1: The blind-mount (BM) models come with a pre-fitted back can
Screws for Tuning Port
mounting wings
Rotary Switch
Fig 1.2: A pre-install (PI) model shown without optional pre-install back can
Euro Type Plug
Conduit Knock-out points
Fig 1.3: Optional pre-install (PI) back can for PI models
Note that the CMS 801 PI model's transformer is pre-attached to the CMS 801 PI back can for easy install.
Accessories
Each product is supplied with the following accessories as standard:
Euro Type Connector
C-Ring
Grille
Euro Type Connector Euro Type Connector
Paint Mask
Optional accessories:
Plaster (Mud)
Ring
17
Quick Start Guide
Tile bridge kit
Note: A tile bridge kit
must always be used
when installing into
suspended ceiling tiles
Cut-out template
60 W Transformer
NOTE: for use with CMS801 PI
model in distributed lines without
back-cans.